Side Feed Injector / EJ207 Rear Cam Sensor Connector Kit
2-PIN FEMALE CONNECTOR
Replacement connector kit includes connector housing, terminals, and wire seals for end user crimping and assembly. Optional pigtail version is pre-installed on to 8in long wire leads (wire colors are black). Available in grey or black.
This is a 2-pin connector used for some cam position sensors, side-feed fuel injectors, knock sensors, etc. A similar looking connector is used for crank position sensors. The two types can be identified by the location of the guide "ribs". This is the low rib type while the crank sensor uses the high rib type. Terminals supplied fit 22-16awg wire. Optional terminal size of 14awg can be supplied on request. Wire seals supplied fit 2.0 to 2.7mm insulation diameter.
What it fits:
- JDM EJ207 V7-9 Rear Cam Sensor
- Side-Feed Fuel Injector
Couldn't load pickup availability
Pickup available at Rallispec
Usually ready in 24 hoursPairs well with
Side Feed Injector / EJ207 Rear Cam Sensor Connector Kit
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.